5 Common Mistakes Dallas Asphalt Sealcoating Companies Make
5 Common Mistakes Dallas Asphalt Sealcoating Companies Make
Regular asphalt sealcoating is the best way to maintain the health, beauty, and reliability of your blacktop paving. This service looks simple, but it requires substantial skill to execute correctly. Unfortunately, many amateurs and inexperienced companies offer sealcoating service, only to make mistakes that compromise your pavement’s protection. Read on to learn more about the most common mistakes that Dallas asphalt sealcoating companies make.
Is It Normal for Dallas Asphalt Sealcoating Companies to Provide Quotes Without Seeing Pavement in Person?
Asphalt seal coating isn’t as simple as lathering on a sealant and calling it a day. Projects like this require ample planning, and every job is different. Sealcoating companies can provide basic estimates over the phone or by email based solely on square footage. However, the only way to deliver an accurate quote is to visit your property in person and perform a thorough inspection.
That’s because paved surfaces need varying degrees of repair and surface prep. Sealcoating companies in Dallas need to understand the condition of your pavement to determine what repairs it needs, how much preparation it requires, and how many layers of sealer are best. The only way to learn that information is through a professional inspection.
Does Sealcoating in Dallas Require Any Surface Prep?
Asphalt sealant will only bond to clean, dry pavement. While your blacktop surfaces might look clean enough, paving tends to accumulate a layer of grime that can prevent successful bonding. Therefore, every asphalt seal coating project should begin with thorough surface prep, including picking up turn, removing overgrown vegetation, washing, and stain pretreatment.
Failing to do any of that will result in lackluster results. Rather than adhering to your pavement, the asphalt sealant will peel and flake, leaving your pavement vulnerable to damage.
Can Asphalt Sealcoating Contractors Incorrectly Prepare Sealer?
The best asphalt sealcoating contractors will use high-quality products designed for longevity and optimal protection. Formulations vary, but all asphalt sealants require additional preparation before application. That typically requires sealcoating companies to add a specific amount of water and sand.
One mistake many asphalt sealcoating contractors make is ignoring manufacturer guidelines and preparing the sealer incorrectly, often by adding too much water and omitting sand. The result is a watered-down sealer that contractors can use for more projects.
The problem is that sand improves longevity and slip resistance. Leaving out the sand and diluting the sealer with water will compromise the product’s integrity and lower its protective qualities. While sealcoating companies in Dallas that make this mistake save money, you’ll end up paying more through repairs and frequent sealing appointments.
What Types of Equipment Do Dallas Asphalt Sealcoating Companies Need to Complete a Job?
Sealcoating in Dallas requires a variety of tools. Sealcoating companies typically apply sealer with squeegees or sprayers, quickly and efficiently covering most of the surface area. However, edge and detail work require hand tools.
Some sealcoating contractors in Dallas don’t bring the tools they need to perform that detail work. Thus, delays that could compromise the results occur. The best asphalt sealcoating contractors will bring a complete arsenal of tools and equipment to complete the job as scheduled.
Is Applying Asphalt Sealant in One Thick Coat Better?
The correct way to perform asphalt seal coating is to apply multiple thin coats. Most surfaces require at least two layers of asphalt sealant for a smooth finish and optimal protection. Some areas may require three or more coats.
Inexperienced sealcoating companies in Dallas may try to save time by applying a single thick coat. However, doing so always ends in disaster. A thick layer of asphalt sealant won’t cure evenly. The top might dry out first, trapping the moist sealer below. Sealcoating in Dallas is a slow and steady process, and contractors need patience to apply sealer coat by coat.
When you turn to Legacy Paving, you don’t have to worry about these asphalt seal coating mistakes. We’re a company with years of experience and a dedication to quality. We never cut corners, rush jobs, or make simple mistakes that could sacrifice the results. Our team is well-trained and eager to do things right.
That applies to all our services, including asphalt paving, repairs, milling, overlays, concrete parking lots, sidewalks, ADA-compliant ramps, driveway paving, and more. Get your free quote today by calling Legacy Paving at (214) 771-5726, emailing info@legacypavingtx.com, or using our online form.
