What Makes For A Successful Sealcoating Project in Dallas?
What Makes For A Successful Sealcoating Project in Dallas?
Are you planning a sealcoating project in Dallas? While sealcoating may seem simple, it requires careful planning and preparation to be done correctly. When it’s your pavement’s safety, beauty, and longevity on the line, the last thing you want to do is “wing it.” In this blog, we’ll cover the basics to help you and your contractor get amazing results with asphalt seal coating in Dallas.
Does a Sealcoating Project in Dallas Require Surface Preparation?
Every sealcoating project in Dallas begins with thorough surface preparation. After determining the right approach, sealcoating professionals need to block off the pavement from traffic, turn off the sprinklers, and give the asphalt paving some attention.
Asphalt sealant will only bond to clean, dry pavement. While your blacktop might look clean, it’s likely covered in a layer of dirt. Leaving that grime behind will interfere with how the asphalt sealant adheres to the paving.
The best Dallas asphalt sealcoating companies will take some time to sweep away loose dirt, pick up trash and debris, and wash the pavement surface. If there are stains, contractors will apply a pretreatment solution. Then they’ll allow the surface to dry completely before applying the asphalt seal coat.
Surface prep is critical, and no reputable sealcoating company will skip this step.
Does the Quality of the Asphalt Sealant Matter?
The success of asphalt seal coat projects hinges on the quality of the sealer used. There are many options available. Core formulas include asphalt emulsions, refined tar, and specialty resins. Each asphalt sealant formula has its pros and cons. What’s right for your sealcoating project in Dallas will depend on your pavement’s unique needs and your budget.
Beyond choosing the right type of asphalt sealant, ensure your sealcoating contractor uses a high-quality, premium-grade product. Sealcoating products from big-box stores won’t cut it. You need professional-grade alternatives only available to Dallas asphalt sealcoating companies. They last longer and produce better results.
Do Seal Coating Companies in Dallas Need to Prepare the Sealer?
Sealcoating companies in Dallas can’t apply the sealer in its raw form. They must prepare it according to the manufacturer’s instructions. Exact details vary from one sealcoating product to the next. What’s important is that Dallas asphalt sealcoating companies don’t ignore those instructions.
Most manufacturers require adding a specific amount of sand and water. More unscrupulous contractors may try to add more water to dilute the formula or exclude sand to save money. Doing so can lead to lackluster results. Less sand impacts durability and reduces traction.
Proper sealer prep makes a difference, and the best sealcoating companies in Dallas won’t cut corners.
How Many Coats Should Dallas Asphalt Sealcoating Companies Apply?
Asphalt seal coating in Dallas requires at least two thin coats. Contractors should apply thin layers, allowing them to dry before adding more. A thick application will lead to uneven curing and poor durability. It takes longer, but applying thin layers to build coverage is the right way to do asphalt seal coating in Dallas.
The best sealcoating companies in Dallas will assess your pavement’s needs and identify high-traffic areas that could benefit from additional coats. Many asphalt seal coat professionals will apply three or four layers in key areas, including parking lot travel lanes, intersections, transition points, and more.
How Long Does a Sealcoating Project in Dallas Take to Complete?
After applying the asphalt seal coat, your pavement will need up to 48 hours to cure. Don’t make the mistake of assuming that your pavement will be ready for traffic hours after Dallas asphalt sealcoating companies leave the site.
Curing is a slow and steady process. The water content in the asphalt sealant must evaporate before the product can bond to the pavement. Driving or walking on the surface before the asphalt seal coat is ready will lead to tracking or peeling. Keep paved surfaces blocked off until sealcoating companies in Dallas give you the OK.
In the meantime, continue using temporary parking areas and keep all signs posted to avoid inadvertently damaging your asphalt seal coat.
Let Legacy Paving be your source for asphalt seal coating in Dallas. We’re experts with over a decade of proven experience. Unlike other contractors performing asphalt seal coating in Dallas, we never cut corners, rush jobs, or skimp on quality. Our goal is to raise the bar for asphalt maintenance excellence. We do things the right way, developing tailored solutions that count.
In addition to asphalt seal coating in Dallas, we’re available for new paving, repairs, milling, overlays, concrete sidewalks, curbing, ramps, concrete repairs, ADA compliance, parking lot striping, and more. Get your free project quote today by calling Legacy Paving at (214) 771-5726. If you prefer, you can also use our online contact form or email the team at info@legacypavingtx.com.
